Gearless machine ITG 25 version .20 - .30
The range of machines gearless for elevator ITG 25 version .20 - .30 produces the best performance even with high working temperatures and its magnets are not prone to oxidize over time and lose performance.
The 24-pole permanent magnet motor assures the best possible performance and the most compact dimensions.
Installation flexibility
The compact dimensions of the gearless machine for elevator ITG 25 version .25 - .30 facilitate its installation in any MRL lift system, even with a reduced headroom. Using the specific bedplates, the gearless machine for elevator ITG 25 version .20 - .30 can be easily installed also in elevators with machine room and 1:1 roping.
Package with the inverter
The elevator gearless machines ITG 25 version .20 - .30 have been designed to provide the best possible efficiency, which can only be achieved by using an inverter that is up to the task and capable of supplying even very low currents.
ITG can supply the complete package, consisting of machine and inverter, specially tuned for the supplied machine
Technical selection and configuration software
ITG customers are allowed to use the 'ITG Configuration Wizard' software which uploads elevator system data to provide a selection of the most suitable ITG gearless machines. In addition, the ITG "Configuration Wizard" provides the comparison between the machine plate data and the actual values provided in the elevator system, as well as provides the calculations related to the safety and traction of the ropes, the choice of the inverter, the space for emergency braking and operating costs for electricity and efficiency class






Static load 1:1 - 2:1 | from 1.750 Kg - 1.950 Kg. up to 3.900 Kg |
---|---|
Payload | from 320 up to 550 Kg |
Speed | from 0,4 up to 2 m/s |
Power feeding | 230 V - 380 V |
Traction sheaves | 200, 210, 240 and 320 |
Dimensions | Width limited down to 271 mm. |

Gearless brochure

Machine Drawing

Declaration of incorporation document

Gearless ITG 25 version .20 - .30 High Standard Extended Bedplate

ITG 25 version .20 - .30 low bedplate

High Bedplate Gearless ITG 25 version .20 - .30 - DXF

ITG 25 version .20 - .30 low bedplate - DXF
You must be registered and logged in to view the product documentation.